Hello. We use cookies on this website
to help us and our partners improve
your browsing experience. More Info
Manage Cookies Close

The K-Lever2:

Independent clutch and brake operation for disabled motorcycle riders

2016-02-18 17:55:56

K-Lever prices from £940 - VAT exempt for disabled riders

Cog icon and divider line

Following in the footsteps of the Kliktronic electrics system, this exciting new innovation is the perfect solution for motorcycle riders who are unable to use their right foot for rear brake operation.

The neat modular design of the K-Lever2 enables independent operation of both front and rear brakes using just one hand.

Alternatively it can be configured for clutch and brake operation; hydraulic and cable modules offer total versatility.

So how does it work?

 K-Lever2 front brake
 K-Lever2 front and rear brakes

The picture on the left shows the application of the front brake only. On the right, the rider grips both levers simultaneously and applies both front and rear brakes.

Each lever has a range of adjustment which results in a total possible offset of more than 60mm (2- 1/4”).

Hydraulic modules are available in either 14.0mm or 17.5mm bore sizes so that the front and rear master cylinders can be matched to the calliper sizes for the optimum braking performance.

Gallery K-Lever 2 installations

Aprilia Tuono V4



Here to
help you

Our workshops are fully equipped with lathe, milling machine, collet lathe, MIG and TIG welding facilities. We can carry out adaptations to all bikes, trikes and outfits.

Please contact us for a friendly chat and advice

- we have over 15 years’ experience in finding solutions to overcome disabilities.

The K-Lever2 is priced from £843 retail; please contact us directly for further information.

FAQs about the K-Lever2 Clutch & Brake System

Q: I have a cable clutch and want to transfer it to the right hand side along with the front brake - will the K-Lever2 allow this?

A: Yes, the K-Lever2 is able to offer both cable and Hydraulic operation on either the left or right side of the handlebars.

Q: How can I operate the levers independently?

A: The levers have a wide range of adjustment and can be offset from each other. Also a longer lever (+30 mm) can be fitted to one module thus enabling two or three fingers to grab one lever and the other fingers can easily reach up for the shorter lever.

Q: I have car callipers on the rear of my trike and a standard bike rear master cylinder does not have enough fluid displacement to work them - will the K-Lever2 operate them?

A: The K-Lever2 has a choice of bore sizes - either 14.0mm or 17.5mm we would recommend the 17.5mm bore for your rear brake operation.

Q: I have 1” bars on my machine will the K-Lever2 fit these?

A: Yes, the K-Lever2 is supplied with an adaptor that enables it to be installed on 1” or 7/8” bars.

Q: If I buy a K-Lever2 and subsequently sell the machine can I transfer it to a different machine?

A: Yes, even if the machine you are changing to has a different configuration, for example hydraulic clutch instead of cable, providing you purchase an additional hydraulic module then the K-Lever2 can be re-configured to suit.

We would love to hear from you!

Address line 1
Address line 2
Town / City
Postcode / Zip

Bike / Car Make
Other details
Nature of Disability

Once we have received your enquiry we will contact you with the exact price, including delivery and insurance.

To find out more about how the K-Lever2 could help you
get in touch today.

motorbike icon